BEE FR-510 – Face Recognition Temperature Measurement Terminal
Features
Accurate Temperature Measurement
Abnormal Alarm
Non-Contact
Face Recognition
Mask Detection
Fast

Functions
Accurate Temperature Measurement
Non-contact automatic temperature measurement, fast and accurate temperature measurement, temperature measurement accuracy of . ±0.3℃, automatic collection and recording of abnormal temperature information.
Real Time Alerts
Custom temperature detection threshold, data direct display, abnormal voice alarm, no traffic.
Wearing a Mask to Identify
Automatic identification of whether or not a person wears a mask, a voice alert for non-wearing masks and a ban on traffic, to enhance awareness of prevention.
Face Recognition
Face recognition match, quickly lock the body temperature abnormal target identity, improve the pre-warning, in-process, after-the-fact traceability of the work efficiency.
Key Cloth Control
Standard with a 10,000-level face library, face control, can be linked to the public security population information management platform, or quickly docking third-party platform, control the identity of personnel information and activity trajectory, the epidemic area personnel to focus on management.
Safe & Stable
High-performance, high-stability embedded Linux system with built-in high-performance AI processor
Rapid Deployment
Support gate, wall mount, optional WIFI/4G network communication mode, rapid deployment, to meet a variety of installation environment and scene application needs, reduce the risk of cross-infection, save manpower, material resources.
Global Management
Community, park, port station a variety of scenes full coverage, visual data platform, management of regional data at a glance, to achieve record backtracking, data analysis and so on
Technical Parameters
Operating system | Linux |
Camera | 2 million wide dynamic, real-time dual camera, strong backlight |
Display | 7-inch IPS full screen, resolution 600 x 1024 |
Verification mode | Face, temperature test, optional IC card, ID card |
Temperature range | 0℃ ~ 50℃ |
Temperature accuracy | ±0.1℃@30CM、±0.3℃@50CM、±2℃@150CM |
Wearing a mask to detect | Support swear mask detection, automatic recognition of voice alerts without a mask |
Storage capacity | 30,000 face banks, 150,000 records |
External interface | RJ45, RS232, Wigan, Relay Output, Door Magnet, Alarm, Switch, Reset |
Operating voltage | DV12V±20% |
Working environment | -30℃~70℃,0≤90%RH |
Communication | Wired network, optional WiFi, 4G |
Installation | Wall bracket, wall mount, 86 box mounting |
Appearance size | 247 (L) x 127 |
Temperature Display


Detection Of Masks

Detect wearing a person who is not wearing a mask: Voice Reminder: “Please Wear A mask”

Detect wearing a mask & is a Whitelist person: Release
Wall-Mounted

Gate Type

Scenarios
Subway station
Customs ports
Airports
Railway station
Hospitals
Schools
Checkpoints
Supermarkets




BEE ATT400B – Automatic Thermal Temperature Measurement & Screening Option

Features
Large scenes can also be accurately & quickly screened
The system contains blackbody, and the temperature measurement accuracy is ≤0.3℃
Simultaneous temperature display of visible and infrared thermal imaging
Supports multiple abnormal body temperature alarms
Supports automatic capture and video recording of alarm to provide evidence after the event
Supports automatic temperature calibration of body surface to make temperature measurement more accurate
Supports historical alarm record query
The whole system which includes bracket & computer can be delivered without additional equipment
Technical Parameters
Thermal Camera | |
Maximum Image Size | 384*288 |
Focal Length | 18mm |
Angle of View (H*V) | 25°*19° |
Visible Camera | |
Maximum Image Size | 2 MP |
Focal Length | 3.8~16mm |
Temperature Measurement Accuracy | |
Environment Temperature | 16°C~32°C |
Temperature of tested target | 32°C~42°C |
Temperature accuracy | ±0.3℃ |
Function | |
Alarm Response Time | <1s |
Color Code | 11 |
Interface | |
Infrared Head & Main Interface | Aviation Plug |
Host & Server Interfaces | RJ45 |
Power | |
Input Power | ≤15W |
Weight | <5KG |
Dimension | 345*189*154mm (host) |
Smart | |
Alarm | Multi point alarm function |
Capture & Recording | Supports the functions of alarm capture and real-time recording |
Temperature Display Data Query | Simultaneous display of temperature in infrared and visible images |
Body Surface Temperature Correction | Supports automatic temperature calibration |
Power | |
Operating Humidity | ≤90%RH |
Standard Configuration
Thermography
Computer
Blackbody
Bracket
The system products also include keyboard, mouse, power adapter, etc., which can be delivered in an integrated way, and can be directly applied in the factory without external products.
BEE FRA-213 – Face Recognition Access Control Terminal With Digital Temperature Measurement Module
The digital temperature measurement face recognition access control terminal is a kind of access control device with precise recognition rate, large storage capacity and fast recognition, which integrates UNV face recognition technology and non-contact temperature detection technology.
The digital temperature measurement module supports rapid body temperature detection. Thus, the product can achieve face recognition and temperature detection at the same time, and support warning people with abnormal body temperature. It can be widely applied in the crowded places, such as smart communities, schools, office buildings, hospitals and other important areas.

Features
Supports non-contact detection
of wrist temperature, support warning people with abnormal body temperature
Supports body temperature detection and personnel information binding
which can quickly confirm personnel information and do body temperature detection
Support configure temperature detection threshold
value and personnel access authority can be configured through temperature detection threshold value
Built-in deep learning dedicated chip
Supports local offline recognition, 10,000 face capacity, face
Whitelist (1:N)
Non-contact wrist temperature detection module
measurement range is between 30℃ to 45℃, measurement accuracy can reach 0.1℃, measurement deviation is less than or equal to 0.5℃, and measurement distance is between 1cm to 2.5cm
Deep learning algorithm model based on UNV independent intellectual property rights
face recognition accuracy rate > 99%, false rate < 1%
Fastest recognition time
0.2 seconds, various model merge mode are used to reduce false rate and increase pass rate
Support anti-spoofing detection based on deep learning algorithm
effective against fraud such as photo and video
WDR, 2MP (1080P) low illumination wide-angle camera and F1.6 large aperture lens
for capturing high quality image with various complex lighting scenes
Support face metering and human metering
for fast adapting to ambient light
Suggested height for face recognition
between 0.8m and 2.2m,face recognition distance: 0.2m to 2.9m
Support screen sleep mode
keep the minimum brightness to prevent glare at night
Support add up to 6 photos of the base library for a single person
Built-in 4G EMMC front end storage
stable and reliable, up to 30,000 events capacity (with images)
Support tamper protection
support door open timeout and time exceed alarm function to keep door opening during fire alarm active
Support video capture, support ONVIF protocol
Support face, card, password and QR code authentication to control door open
Two-way audio with indoor monitor
Technical Parameters
Operation System | Linux |
Face Recognition Accuracy Rate | >99% |
Face Recognition Time | 200ms |
Face Capacity | 10,000 |
Card Capacity | 100,000 |
Storage Capacity | 4GB |
Event Capacity | 30,000 (With images) |
Measurement Range | 30C – 45C |
Measurement Accuracy | <0.1 C |
Measurement Deviation | <+0.5C |
Measurement Distance | 1cm – 2.5cm |
Authentication Mode | Face Whitelist: (1:N) Card: (1:N) Face + Body Temperature |
Door Opening Method | Face, Password, QR code, Card |
Communication Mode | 10/100Mbps adaptive network port |
Card Type | Mifare 1 Card |
User Management | Support user library addition, delection, update |
Record Management | Support local recording and real-time upload |
Interface | LANx1, Wiegand Iput x1, Wiegand Output x1, RS485 x1, Alarm Input x2, Alarm Output x1 USB2.0 x1, Lock x1, Door Contact x1, Exit Button x1 |
Power Supply | Input 12V + 25% DC |
Screen | Touch Screen, Size: 7 inch |
Camera | Dual Lens, 2MP, 1080P |
Supplement Light | LED soft light and infrared light |
Dimensions (LxWxH) | For terminal: 134.0mm x 33.0mm x 305.0mm |
Working Environment | For terminal: -20C ~ +65C, Relative Humidly <95% (non-condensing) |
Protection Level | Both terminal and module: IP 54 |
Application Situation | Indoor, No wind |
BEE TI165 – Thermal Imagers

Features
2.8” TFT Screen
Infrared resolution: 160 x 120
Frame frequency: 9HZ
Temperature measurement range 30 to 45 ºC
Accuracy: ± 0.5 ºC (1M)
Photographed function and SD card storage
PC software analysis
Point temperature measurement
Real-time image transmission
Visible light (640 x 480)
Type C: USB interface for Lithium battery charging
1.4” tripod mounting hole
Functions
High- temperature limit exceeding alarm
The customized high temperature limit can be set to 37.3 ºC.
For temperatures > 37.3 ºC , indicator light and screen will indicate high temperature alarm, which can effectively and quickly screen individuals with abnormal temperature.

Real-time image transmission
Set the USD mode to USB camera, connect to the USB cable to the computer software by real-time image transmission.
Features: Real-time image transmission, mirror the computer on larger screen for monitoring.

Scenarios
Widely used in:
Schools
Factories
Commercial & Residential Buildings
Supermarkets
Etc

Specifications
Sensor | Uncooled focal plane |
Temperature Range | 30 ºC -45 ºC |
Resolution | 0.1 ºC |
Accuracy | ± 0.5 ºC @ 1m |
Minimum Measuring Distance | 15cm |
Temperature Measurement Response Time | <500ms (95% of reading) |
Pixel Of Thermal Imagery | 19200 (160 x 120) |
Pixel Dimensions | 12 um |
Palettes | Iron red, rainbow, glowing white, glowing black, glowing red, lava, high-contrast rainbow |
Bandwidth Of Infrared spectroscopy | 8-14 um |
Field of View (FOV) | 56º (H) x 42º (V) |
Instantaneous Field Of View (IFOV) | 6mrad |
Thermal Imaging Sensitivity | <50mk |
Frame Rate | <9Hz |
Temperature Display | Center temperature measurement & high temperature tracking (default) |
Image Format | BMP |
Buttons | 10 buttons: Power button, Camera button, Return button, Navigation buttons, SET button, SET button, Browsing button, LED lighting button |
Image Modes | Thermal imagery, digital camera (visible light), fusion |
Temperature measuring Point | Besides central point, 3 temperatures measuring points can be added |
Visible Light | Yes |
Resolution Of Visible Light | 640 x 480 |
Display Resolution | 320 x 240 |
Mixed Setting | 0% (total visible light), 25%, 50%, 75%, 100% (total thermal imagery) |
PC Analysis Software | Yes |
Real-Time Image Transmission | Yes (PC software image projection) |
Data Communication | Type-C USB |
Auto Power off | Selectable (5min, 10min, 30min), 30min auto power off (default) |
Service Time | >6 hours |
Charging Time | <5 hours |
Charging Voltage | 5V/2A |
Image Storage | Micro SD card |
General Characteristics
Power | A single Li-ion 3.7V/5000mAH 26650 battery |
Display | 2.8” TFT LCD |
Product Color | Red & Gray |
Product Size | 236mm x 75.5 mm x 86mm |
Standard Accessories | Manual, Type-C USB cable, 16GB TF card |
Standard Carton Gross Weight | 2.2 Kg |