BSM-001 – Spray &UV Disinfection , Temperature Measurement
OVERVIEW
Intelligent robot could atomize a variety of disinfectants into super dry mist and disperse to disinfection area in high- speed airflow. It could reach disinfection area by autonomous navigation, obstacle avoidance and movement, and disinfect the target 360.
It could also support iPad control for quick and central disinfection.
Using this disinfection method by robot could save manpower and lower the infection risk effectively; it could make disinfection more efficient and improve safety greatly.

FEATURES
High efficiency
Multi-angle 360° stereo spray with automatic lifting nozzle
Ultra-dry disinfectant spray, up to 6-log dispersion with full coverage
1000m3 disinfection can be done in fastest 15min
Intelligent
Use task configuration tool to configure task time, route, content, move frequency, task planning etc.
By pressing a button, remote control or timer task to start disinfection
Working logs automatically saved; autonomous navigation,
obstacle avoidance, and autonomous charging.
Safety
Ultra-dry disinfectant atomization with no residue, way safer
Human-machine separation, reducing personnel contact so as to reduce the risk of infection effectively
Navigation
Autonomous & optimal
Nozzle
Automatic lifting & 360° coverage
Multi-Terminal & Efficient
Comprehensive Map Management
Meticulous & Flexible
WORKING MODE
Task Planning Mode
Using task configuration function to configure disinfection the area, time and frequency to robot. It could do path planning, avoid obstacles and disinfect intelligently as long as the disinfectant is sufficient. In addition, it can return to the charging pile autonomously when the battery is low.
Command Mode
12-inch HD display could show disinfected area and points directly; and it’s possible to send
commands from the screen to disinfect specific point or area.
Ipad Control Mode
Equipped with iPad to control the robot remotely for automatic disinfection; remote control without network is also workable.
THE PRODUCT

PARAMETERS
Movement | Autonomous path planning (covers an area of 25,000m2) |
Speed | 0-0.6m/s |
Disinfection efficiency | 1000m3 disinfection in fastest 15min |
Run time | 5~6h fully charged (charging automatically) |
Spray particle size | ≤10μm |
Spray Rate | 2L/h-5L/h |
Disinfection level | High efficiency, 6-log level |
Liquid volume | 16L |
BSM-002 – Ozone and UV Disinfection
OVERVIEW
Isolation
As the hospital isolation area is harsh,
it must be regularly disinfected and cleaned to maintain the environment health.
Working & Living environment
As the The working and living environment need to be regularly disinfected to properly maintain healthy.
Efficiency Improvement
It’s more efficient than traditional manual way of disinfection or cleaning, at the same time, it can avoid the risk of staff being infected.
FEATURES
Wide sterilization
With the function of killing microorganisms extensively, including viruses, bacteria ,spores, fungi, etc.
Fast sterilization
With fast killing speed, it’s able to disinfect the air, objects’ surface, etc.
Timed killing
As an epidemic prevention product, its size is small but with high efficiency. It supports autonomous navigation system without human intervention, and no need to disinfectant, just need to be charged.
Autonomous navigation obstacle avoidance
Laser, ultrasonic and inertial multi-sensor fusion. High obstacle avoidance stability, safe and reliable
Can achieve close – range irradiation, more complete sterilization
Can be irradiated at multiple points to avoid rays from being blocked
360 ° depth disinfection & sterilization
Ozone + , ultraviolet-more complete
disinfection and sterilization .Deep cycle disinfection saves money
Efficient and safe
Turbo fan speeds up more efficiently Ozone + ultraviolet -strong disinfection is safer and more efficient
Convenient control method
Mobile phone control more is convenient. Man – machine separation is safer
CORE TECHNOLOGY

Autonomous navigation, autonomous obstacle avoidance

Man-machine separation operation to avoid infection

Integrated multiple rapid disinfection and sterilization technologies
WORK PROCESS

THE PRODUCT

PARAMETERS
Category | Performance | Parameters |
Tractor Parameter | Length*width*height | 625x600x800mm |
Chassis ground clearance | 40mm | |
Operating temperature | -20~+60 degrees | |
Protection level | IP55 | |
Ozone Disinfection Management | Ozone production (ozone generator) | 8g/hour |
UV ozone production (185nm wavelength) | 216mg/hour | |
Ozone disinfection efficiency ( ozone only ) | 100 cubic meter/30 min | |
Ultraviolet Disinfection Management | UV lamp power | 36W (Max Disinfection Distance 5~6m) |
UV lamp wavelength | 254nm +185nm wavelength | |
UV disinfection efficiency (only UV) | 30 sqm/30 min | |
Ozone+ultraviolet efficiency | 30sqm/100 cubic meters in 25 ~30 min | |
Chassis Performance | Running speed | 0-3.6km/hour |
Maximum obstacle | 20mm | |
Maximum climbing angle | 10 degrees | |
Turning radius | In situ rotation | |
Power Management | battery capacity | 24AH |
charging method | Auto charging/Manual charging | |
Battery rated voltage | 48V | |
operating hours | 5 hours | |
Precautions | No humans are allowed during disinfection. To ventilate 30 min then enter into the Area after the robot stops. | – |
BSM-003 – Patrol, Temperature Measurement
OVERVIEW
24 hours patrol
Imported thermal imaging sensor for temperature measurement and early warning
Mask recognition and prompting
Remote intercom and shouting
Emergency help, disposal
5-channel HD video
5G depth adaptation
Special equipment (Catch bad guys)

THE PRODUCT

BSM-004 – Patrol, Temperature Measurement
OVERVIEW
24 hours patrol
Imported thermal imaging sensor for temperature measurement and early warning
Mask recognition and prompting
Remote intercom and shouting
Emergency help, disposal
5-channel HD video
5G depth adaptation
Special equipment (Catch bad guys)

PRODUCT

BSM-005 – Spray Disinfection
OVERVIEW
120 kg large capacity corrosion-resistant liquid storage tank
Spraying at regular time, fixed point and fixed area
Swing spray covering 10 meters
6×6 high-performance chassis, 30-degree climbing, 10cm obstacle-crossing to adapt to various terrains, indoor and outdoor
Support 5G network, compatible with wifi / 4G network comes with GPS positioning system
Fully automatic charging system ensures that the robot can perform tasks 24 hours a day
Publicity and promotion

BSM-006 – Spray Disinfection
OVERVIEW
Efficient electrical disinfection robot specially developed for indoor and outdoor disinfection and epidemic prevention. It features electrical spray liquid, low noise, no fuel, adjustable spraying flow, food and medicine grade diaphragm pump, and ducted fan booster.
It is suitable for all kinds of strong oxidizing disinfectant solutions, has long range and good atomization effect and can be controlled by remote driving.
It meets the safety, reliability and efficiency requirements of disinfection in all aspects.

FEATURES
Electrical injection, low noise, high efficiency, no fuel, no high- temperature components.
Double nozzle design with large water output, adjustable flow and controllable spraying capacity
Diaphragm pump in food and medicine industry, corrosion-resistant, suitable for all kinds of strong oxidizing disinfectants
Ducted fan booster, longer range, thinner water mist, two modes available
Optional electrical PTZ to realize remote angle control and provide automatic scanning and spraying;
Unmanned operation with self-driving system or FreeWalker 5G remote driving.
THE PRODUCT

PARAMETERS
Type | Parameters | Note |
Disinfection solution | 30L | With trailer parts, 100L adaptable |
Max. flow | 1.5L/Min | |
Spray time | 20Min-60Min | With trailer parts, up to 3H |
Max. spray area | 15000m2 | |
Spay distance | 2-8m | 2 distance modes |
Battery power endurance | 1.5-2H | |
Spray angle | Horizontal 270°, vertical 35° | Electric PTZ version |
Horizontal 360°, vertical 35° | Manual switching version | |
Spray mode | Pump boosting | Indoor use |
Water boosting + duct boosting | Outdoor scenario |